MICRO TERMINALS
[ vedi anche ] Home [ vedi anche ] Products [ vedi anche ] Bar Code [ vedi anche ] Terminals [ vedi anche ] Micro
[ MDT400 Micro Data Terminal ]
[ 1 ]

to receive informations you have to sign in Sign-In

MDT400 programmable micro terminal [ questa pagina in italiano ]

   The MDT400 like the MDT300 is an online-laser-bar-code reader and a portable palm terminal at the same time; it's the affordable yet performing solution you were looking for easy to use. No need for cradles: just a simple cable to connect MDT400 to a computer. The colour coded keypad is designed for single handed use, and the large back-lighted display allows user-friendly features.
   The MDT400 is completly "C" programmable ( libraries and standard software available ), being as small as a mouse and weighing less than 180 grams, the MDT400 is really palm sized.

No problem at all if you have to bring it with you all day long : you'll find it ready in your pcket whenever you need to read a bar-code. The MDT400 uses highly performing Ni-Mh recyclable batteries of the last generation. This features allows the reaching of more than 15.000 readings without any need to recharge: it is great, isn't it ?
You can use your terminal any time you need to read a bar code: for daily POS activity connected to your computer, but also there where the items are, for instance tocllect data during stock inventory operations, or for travelling salesmen solutions.

Models

MDT400
 Micro Data Terminal with scanner laser, display, keyboard and 512 Kb sram.

Accessories

KB-ADP
 Keyboard wedge adapter.
CC60-xx
 Set Cables for KB-ADP keyboard wedge solutions.
RS-ADP
 Serial RS232 Adapter.
CRD-300
 Cradle for data and recharge.
PWS02-300
 Power supply for cradle or for adapter.
CC60-RS/9
 Serial RS232 cable 9 pins.
CC60-RS/25
 Serial RS232 cable 25 pins.
SW-400
 Standard Software.

Technical Specifications

Power Supply :
 batteries at the Ni-Mh 650 mAh.
Microcontroller :
 8 bit C-MOS. Programmable.
Light Source :
 Laser at 675 Nm.
Display :
 Back-Lit graphic LCD 16 characters x 4 lines plus icons.
Data Memory :
 from 512 Kb at 2 Mb Sram.
Interfaces :
 RS232 or keyboard wedge.
Scan Speed :
 100 scan/sec.
Bar Codes :
 at one dimension 1D :
Code 2/5 Industrial, Code 2/5 Normal, Code 2/5 Interleaved, Code 39 Standard, Code 32 Pharmaceutical, Code 39 Full ASCII, Code UPC A, Code UPC E, Code UPC E Extended, Code UPC 2 Add on, Code UPC 5 Add on, Code EAN 8, Code EAN 13, Code EAN 8 2 Add on, Code EAN 8 5 Add on, Code EAN 13 2 Add on, Code EAN 13 5 Add on, Code 128, Code 93, Codabar, MSI.
[ vedi anche ] Bar Code Manual ( Italian Only ).
Environment :
 Operating temperature from 0° to +50° C.
Storage temperature from -20° to + 60° C.
Humidity from 5% to 95% no condensing.
Dimensions :
 30,5 x 64 x 125 mm.
Weight :
 180 gr.

[ bar code ]
[ to the previous page] [ previous ] [ searching ] [ search ] [ ACSE's news ] [ News ] [ home page ] [ home ] [ a map of our site ] [ map ] [ our address for your Auto ID problems ] [ address ]