PORTABLE READERS
[ vedi anche ] Home [ vedi anche ] Products [ vedi anche ] Bar Code [ vedi anche ] Terminals [ vedi anche ] Portable Readers
[ MP60 penna con memoria ]
[ 1 - 2 - 3 ]

to receive informations you have to sign in Sign-In

MP60 Portable memo wand [ questa pagina in italiano ]

The MP60 is an on-line optical bar code reader and a portable wand at the same time: to switch between the two operating modes you'll have only to unplug a cable!
The MP60 is the best today's technology can offer in terms of pratical use and flexibility.
No need for cradles. just a simple cable to connect MP60 to a computer. No more wasted time and more space on your desk. Completely C programmable (libraries and standard software available).

The MP60 can interface to different terminals and personal computers; with the keyboard emulation interface collected data are transmitted in the same way as if entered through the keyboard, while the serial inteface will allow you to trasmitt data via direct or pass-through RS232.
The oprating parameters can be easily selected via Bar Code menu or through serial commands; a cloning facility is also available. The MP60 uses high performing recyclable internal batteries, with the possibility of adding also an auxiliary battery. This feature allows you to reach more than 8,000 reading without any need to recharge.

Models

MP10
Memo Wand with 128 Kb ram.
MP20
Memo Wand with display and 128 Kb ram.
MP60
Memo Wand with display and keyboard and 128 Kb ram.

Accessories

KB-ADP
Keyboard Wedge Adapter.
RS-ADP
Serial RS232 and Pass-Through Adapter.
CCMP-XX
Serial and keyboard wedge set cables.
CR-MP/1
Cradle to download and to upload data via RS232.
CR-MP/2
Cradle only for batteries recharge.
PS-01/MP
5 Volt power supply.
DU10
Universal decoder.
CPC100
Network multiplexer rete.
PT-MP
Plastic stand for wand.

Specifiche Tecniche

Power Supply : Recharge battery Ni-MH 160 mAh.
Light source : Red visible LED (660 nm).
Scan frequency : 76 - 1780 mm/sec ( da 3 a 70 in/sec.).
Reading Distace : 0 - 1 mm ( da 0 a 0.04 in.).
Bar-Code resolution : 6 mils (0,15 mm).
Angle : 0 - 45 °.
Printing : 0,50 min.
Memory : Static CMOS.
Data Memory : 128Kbytes RAM.
OS Memory : 32Kbytes ROM.
Interface : Serial RS232 (model 20-200)-with external interface: wedge, RS232 and Pass-Through ( model 20-100 )-in network through the net-access point DU10.
Bar Code : 2/5 Interleaved, Code 39, Codabar, EAN/UPC, MSI, Code128.
Trasmission format : 7 bits con 1 o 2 bits di stop.
Trasmission speed : 300, 1200, 4800, 9600 bauds.
Parity : Odd, Even, None.
Keyboard : 2 tasti.
Display : Two rows 16x2 characters LCD ( optianally backlit ).
Dimensions : 188 x 31 x 26 mm ( 6.6 x 1.2 x 0.9 in. ).
Weight : 100 grams ( 3 oz. ).
Operating Temperature : from 0 to 50° C. ( 32 a 122 ° F.)
Storage Temperature : -20° to 70° C. ( -4 a 158° F.).
Humidity : 90% .

[ bar code ]
[ to the previous page] [ previous ] [ searching ] [ search ] [ ACSE's news ] [ News ] [ home page ] [ home ] [ a map of our site ] [ map ] [ our address for your Auto ID problems ] [ address ]